Difference between revisions of "CloudCompare"
From Wiki.OSArch
m |
m |
||
| Line 6: | Line 6: | ||
* License: [[GPL-2.0]] check this[https://github.com/CloudCompare/CloudCompare/blob/master/license.txt] | * License: [[GPL-2.0]] check this[https://github.com/CloudCompare/CloudCompare/blob/master/license.txt] | ||
* Source: https://github.com/cloudcompare/cloudcompare | * Source: https://github.com/cloudcompare/cloudcompare | ||
| + | * Donate: https://donorbox.org/support-cloudcompare | ||
= See also = | = See also = | ||
Revision as of 10:40, 20 December 2020
CloudCompare is a 3D point cloud (and triangular mesh) processing software. It was originally designed to perform comparison between two 3D points clouds (such as the ones obtained with a laser scanner) or between a point cloud and a triangular mesh. It relies on an octree structure that is highly optimized for this particular use-case. It was also meant to deal with huge point clouds.
- Website: https://cloudcompare.org/
- License: GPL-2.0 check this[1]
- Source: https://github.com/cloudcompare/cloudcompare
- Donate: https://donorbox.org/support-cloudcompare
