Editing Revit setup for OpenBIM/Revit IFC project metadata

{{Autodesk_Revit}}
This page describes how to assign information about your Revit project for your .ifc export.

The following attributes may be set on the <code>IfcProject</code>.

{| class="wikitable"
! '''Attribute Name'''
! '''Required'''
! '''Procedure'''
|-
| <code>GlobalId</code>
| Yes
| Create a new <code>IfcProject GUID</code> instance parameter, assigned to the <code>Project Information</code> object.
|-
| <code>Name</code>
| Yes
| Fill out the (Revit standard) <code>Project Number</code> field in the <code>Project Information</code> dialog.
|-
| <code>Description</code>
| Yes
| Create a new <code>IfcDescription</code> instance parameter, assigned to the <code>Project Information</code> object.
|-
| <code>ObjectType</code>
| 
| Create a new <code>IfcObjectType</code> instance parameter, assigned to the <code>Project Information</code> object.
|-
| <code>LongName</code>
| Yes
| Fill out the <code>Project Name</code> field in the <code>Project Information</code> dialog.
|-
| <code>Phase</code>
| 
| Fill out the <code>Project Status</code> field in the <code>Project Information</code> dialog.
|}

The project information properties for an .ifc export are described on the [https://standards.buildingsmart.org/IFC/RELEASE/IFC2x3/TC1/HTML/ifckernel/lexical/ifcproject.htm IfcRoot attributes page] of the IFC 2x3 documentation.

Do not fill out Project GUID. Revit will do this on export. Be aware that a [https://github.com/Autodesk/revit-ifc/issues/378 Revit Project GUID may not be unique].
[[Category:Autodesk Revit]]