Difference between revisions of "OpenStudio/Video Tutorials"

From Wiki.OSArch
m
 
(14 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
= Helix Energy Partners =
+
= [https://www.youtube.com/@helixenergypartnersllc3540/featured Helix Energy Partners] =
 
Free Helix Energy Partners videos available on Youtube. Complete playlist is [https://www.youtube.com/playlist?list=PLRW2KXkdSVUdY2iQ6yjohNT5E5ElLVIhU here].
 
Free Helix Energy Partners videos available on Youtube. Complete playlist is [https://www.youtube.com/playlist?list=PLRW2KXkdSVUdY2iQ6yjohNT5E5ElLVIhU here].
 +
== English Language ==
  
 +
== Core Instructional Videos ==
 +
 +
{| class="wikitable sortable"
 +
|+ Building Energy Modeling in OpenStudio
 +
|-
 +
! Name of Video !! Date Published !! Subject
 +
|-
 +
| '''[https://youtu.be/w-yVgOvcQaA?si=aq4K9LT2sUhQF1Rg Introduction to OpenStudio and EnergyPlus]''' || 2020.02.12 || 0-Meta
 +
|-
 +
| '''[https://youtu.be/n8cOTgb9mfE?si=d03ameuhk4RsmtWa Introduction to OpenStudio and EnergyPlus - Why?]''' || 2023.04.08 || 0-Meta
 +
|-
 +
| '''[https://youtu.be/mTcDmZipUfs?si=NcSAQMcRAkHOQYbx Building Energy Modeling in OpenStudio - Install the Software]''' || 2025.03.18 || 0-Meta
 +
|-
 +
| '''[https://youtu.be/O1QFj350a2I?si=g0Zp4NhGE8UoXKx4 Building Energy Modeling in Open Studio - Importing Library Files]''' || 2020.02.14 || 0-Meta
 +
|-
 +
| '''[https://youtu.be/-5HHfgSlTsc?si=dQ6TMGgsNMlW3Zm2 Building Energy Modeling in OpenStudio - Create Geometry]''' || 2020.02.17 || 6-Geometry
 +
|-
 +
| '''[https://youtu.be/22Lj6kdwWrc?si=NrHPK7Fv0PwGwcU1 Building Energy Modeling in OpenStudio - Add Thermal Zones and Subsurfaces]''' || 2020.02.17 || 9-Thermal Zones
 +
|-
 +
| '''[https://youtu.be/0r1-arLaz20?si=bKdKCgmr8n8gf3Vm Building Energy Modeling in OpenStudio - Site Tab]''' || 2020.02.18 || 1-Site
 +
|-
 +
| '''[https://youtu.be/RsLllMkMjqQ?si=8_vr4VPTwh_bxn2h Building Energy Modeling in OpenStudio - Schedules Tab]''' || 2020.02.18 || 2-Schedules
 +
|-
 +
| '''[https://youtu.be/_tN3scXakiM?si=3lw6qRilhRwqi1_Z Building Energy Modeling in OpenStudio - Construction Materials]''' || 2020.02.24 || 3-Constructions
 +
|-
 +
| '''[https://youtu.be/6qE0jdyCuCI?si=X_0xQqkB2IMoJKhe Building Energy Modeling in OpenStudio - Buildings Loads]''' || 2020.02.24 || 4-Loads
 +
|-
 +
| '''[https://youtu.be/5ZjqfSV6M1k?si=CT91AVJRAZcDRTo5 Building Energy Modeling in OpenStudio - Space Types]''' || 2020.02.24 || 5-Space Types
 +
|-
 +
| '''[https://youtu.be/3nUX_BXHODQ?si=00NzDCzj3RzM6xeg Building Energy Modeling in OpenStudio - Geometry Tab]''' || 2020.02.27 || 6-Geometry
 +
|-
 +
| '''[https://youtu.be/MGjlpbJWhd4?si=WxT5GEOxHYF3hNpv Building Energy Modeling in OpenStudio - Facility Tab]''' || 2020.02.27 || 7-Facility
 +
|-
 +
| '''[https://youtu.be/hOfMFtyfehQ?si=BptdSR03Mlk0rRiW Building Energy Modeling in OpenStudio - Spaces Tab]''' || 2020.02.27 || 8-Spaces
 +
|-
 +
| '''[https://youtu.be/WyTVm_trmZs?si=9A5V_5_RFr9sKr68 Building Energy Modeling in OpenStudio - Thermal Zones Tab]''' || 2020.03.02 || 9-Thermal Zones
 +
|-
 +
| '''[https://youtu.be/osftawugpL0?si=2X6MxI4OC5U1oayL Building Energy Modeling in OpenStudio - Troubleshooting]''' || 2020.03.03 || 0-Meta
 +
|-
 +
| '''[https://youtu.be/WSqe6bZ8Jxg?si=6jNbPMfi1SVXSy1L Building Energy Modeling in OpenStudio - Results Summary]''' || 2020.03.03 || 15-Results Summary
 +
|-
 +
| '''[https://youtu.be/zlbarbpqu10?si=nhaqOqavJWdo3MQL Building Energy Modeling in OpenStudio - Add Hot Water System]''' || 2020.03.04 || 10-HVAC Zones
 +
|-
 +
| '''[https://youtu.be/Uo7xKHDXVXc?si=Rq5SeDUZ-Ip8BpIy Building Energy Modeling in OpenStudio - Add HVAC-1]''' || 2020.03.05 || 10-HVAC Zones
 +
|-
 +
| '''[https://youtu.be/NQ4FpKrpeD8?si=GWm-rKLHzawal6fz Building Energy Modeling in OpenStudio - Add HVAC-2]''' || 2020.03.05 || 10-HVAC Zones
 +
|-
 +
| '''[https://youtu.be/GL_fFPGSeAs?si=iO8ixzPkPYWY2f7O Building Energy Modeling in OpenStudio - Add DOAS System]''' || 2020.03.08 || 10-HVAC Zones
 +
|-
 +
| '''[https://youtu.be/8JlZrvenFBM?si=5D7eofPstoB-eO8o Building Energy Modeling in OpenStudio - Data Viewer]''' || 2020.03.10 || 15-Results Summary
 +
|-
 +
| '''[https://youtu.be/AKhr7CcnQ28?si=Ld2F01K7elYShNaZ Building Energy Modeling in OpenStudio - Exhaust MUA]''' || 2020.03.11 || 10-HVAC Zones
 +
|-
 +
| '''[https://youtu.be/oQPHRyHsdEs?si=rqtKb6K10MhcoxJZ Building Energy Modeling in OpenStudio - Transfer Air]''' || 2020.03.30 || -
 +
|-
 +
| '''[https://youtu.be/WkgQAIaXy78?si=XA88OrZs3YYmNe0O Building Energy Modeling in OpenStudio - SketchUp-1]''' || 2020.07.02 || 6-Geometry
 +
|-
 +
| '''[https://youtu.be/cqnQwKZ80yc?si=wgLOi6bi52MR0ii_ Building Energy Modeling in OpenStudio - SketchUp-2]''' || 2021.03.02 || 6-Geometry
 +
|-
 +
| '''[https://youtu.be/4xtbPwMKIEc?si=urKrZ9QB-L2OfCcZ Building Energy Modeling in OpenStudio - Add Heat Pump Hot Water System]''' || 2024.12.08 || 10-HVAC Zones
 +
|}
 +
 +
=== Portuguese Language ===
 +
 +
{| class="wikitable sortable"
 +
|+ Construindo modelagem de energia no OpenStudio
 +
|-
 +
! Name of Video !! Date Published !! Subject
 +
|-
 +
| '''[https://youtu.be/w0tIUNJtayk?si=gfSTF0PoDyjiLtUu OpenStudio SketchUp - Conceitos básicos sobre simulações termoenergéticas]''' || 2020.05.25 || 0-Meta
 +
|-
 +
| '''[https://youtu.be/1jsE-KACUY8?si=a5AX-6_z4hD-fsqX  Construindo modelagem de energia no OpenStudio - Importando arquivos de biblioteca.]''' || 2020.06.16 || 0-Meta
 +
|-
 +
| '''[https://youtu.be/0Bq9nTasYS4?si=j2j6J5u67IBIlTgA  Construindo modelagem de energia no OpenStudio - Criar geometria]''' || 2020.06.24 || 6-Geometry
 +
|-
 +
| '''[https://youtu.be/vzHY-KzYPak?si=yHMt_JNz-P0ZWa3o Construindo modelagem de energia no OpenStudio - adicione zonas térmicas e subsuperfícies]''' || 2020.06.27 || 9-Thermal Zones
 +
|-
 +
| '''[https://youtu.be/MuluLlAf7GY?si=G3Veytb663v9t9Bl  Construindo modelagem de energia no OpenStudio - Guia Site]''' || 2020.07.01 || -
 +
|-
 +
| '''[https://youtu.be/MEz_6UWSE8E?si=tn2dDAemRlIvON3q  Construindo modelagem de energia no OpenStudio - guia Agendamentos]''' || 2020.07.02 || -
 +
|-
 +
| '''[https://youtu.be/sXkNY8lb-2Y?si=G_33QwnvSl8doym9  Modelagem de energia de construção no OpenStudio - Materiais de construção]''' || 2020.07.09 || -
 +
|-
 +
| '''[https://youtu.be/IQKbFJd_Q8M?si=JVJoW4_zJImQnmEo  Modelagem de energia de edifícios no OpenStudio - Cargas de edifícios]''' || 2020.07.13 || -
 +
|-
 +
| '''[https://youtu.be/3IZT4eCwQuc?si=Cssm1Cijwr_3NOdU  Construindo modelagem de energia no OpenStudio - Tipos de espaço]''' || - || -
 +
|-
 +
| '''[https://youtu.be/_baOM6fRKnM?si=op-IB43iT1GVnvuu  Construindo modelagem de energia no OpenStudio - guia Geometria]''' || - || -
 +
|-
 +
| '''[https://youtu.be/B1ZoY2wihSU?si=3CR1VWQFBaM5XspJ  Construindo modelagem de energia no OpenStudio - Guia Instalações]''' || - || -
 +
|-
 +
| '''[https://youtu.be/OaRPCwAICzE?si=T1r5Nd2yWOckc4a4  Construindo modelagem de energia no OpenStudio - guia Spaces]''' || - || -
 +
|-
 +
| '''[https://youtu.be/7NTtu4FLTG0?si=D8DFltcXWRl9EJ8b Construindo modelagem de energia no OpenStudio - Guia Zonas térmicas]''' || - || -
 +
|-
 +
| '''[https://youtu.be/DqivmIGuakI?si=j-HnTYGXbvd5yYKM  Construindo modelagem de energia no OpenStudio - Solução de problemas]''' || - || -
 +
|-
 +
| '''[https://youtu.be/93hfj80qfLY?si=QMi1b-BaxthTYKj7  Construindo modelagem de energia no OpenStudio - Resumo dos resultados]''' || - || -
 +
|-
 +
| '''[https://youtu.be/vYueRKU5LSM?si=LdbbhPkGsGMZ26U7  Modelagem de energia de construção no OpenStudio - Adicionar sistema de água quente]''' || - || -
 +
|-
 +
| '''[https://youtu.be/TGAPk0h91ys?si=W8LgT_B2_3MqbbxX Modelagem de energia de construção no OpenStudio - Adicionar HVAC-1]''' || Example || Example
 +
|-
 +
| '''[https://youtu.be/ZrG_s5UGl48?si=qrbcoQojM4uN-W0N  Modelagem de energia de construção no OpenStudio - Adicionar HVAC-2]''' || Example || Example
 +
|-
 +
| '''[https://youtu.be/LHK8DkxQrBs?si=p73XcI72KlonuKKD  Modelagem de energia de construção no OpenStudio - Adicionar sistema DOAS]''' || Example || Example
 +
|-
 +
| '''[https://youtu.be/v1Gtpqpq2Ho?si=m1-T2CUqxWtJG37H  Modelagem de energia de construção no OpenStudio - Data Viewer]''' || Example || Example
 +
|-
 +
| '''[https://youtu.be/_gIE5TQY1To?si=YBnTfXHWmIoyTROY  Modelagem de energia de construção no OpenStudio - Exaustão de ar compensado]''' || Example || Example
 +
|}
 +
 +
= [https://www.youtube.com/@NRELOpenStudio/featured NRELOpenStudio] =
 
{| class="wikitable sortable"
 
{| class="wikitable sortable"
−
|+ Caption text
+
|+ Building Energy Modeling in OpenStudio
 +
|-
 +
! Name of Video !! Date Published !! Subject !! Summary
 +
|-
 +
| '''[https://youtu.be/xR6iEpMpCiY?si=Uc_JAsILnpooJ3yd OpenStudio 0.8 Basic Workflow Guide (Introduction & Interactive PDF)]''' || - || - || This video gives you an introduction to the interactive PDF for OpenStudio 0.8.0.
 
|-
 
|-
−
! Name of Video !! OpenStudio Version !! Date Published !! Subject
+
| '''[https://youtu.be/wzzY_W2WELo?si=CxWVZMA1Z7vupYBv OpenStudio 0.8 Basic Workflow Guide (SketchUp Plugin - Building Envelope)]''' || - || - || This video shows you how to choose a template, create your building envelope, add fenestration, and to set boundary conditions and thermal connections between spaces. This video uses the OpenStudio SketchUp plugin.
 
|-
 
|-
−
| '''[https://youtu.be/w-yVgOvcQaA?si=aq4K9LT2sUhQF1Rg Introduction to OpenStudio and EnergyPlus]''' || - || 2020.02.12 || Meta
+
| '''[https://youtu.be/8LTexVna_vw?si=bfhjXTpRHNqwy_Nw OpenStudio 0.8 Basic Workflow Guide (SketchUp Plugin - Space Types and Thermal Zones)]''' || - || - || This video shows you how to assign space types, thermal zones, and thermostats to the spaces in your model. This video uses the OpenStudio SketchUp plugin.
 
|-
 
|-
−
| '''[https://youtu.be/n8cOTgb9mfE?si=d03ameuhk4RsmtWa Introduction to OpenStudio and EnergyPlus - Why?]''' || - || 2023.04.08 || Meta
+
| '''[https://youtu.be/tgeepiBltJI?si=70rFKBFdWJSo-axU OpenStudio 0.8 Basic Workflow Guide (Site, Facility, and Basic Run)]''' || - || - || This video goes into the OpenStudio application, adds weather data, shows the outline view in the facility tab and then runs a simulation with ideal air loads.
 
|-
 
|-
−
| '''[https://youtu.be/mTcDmZipUfs?si=NcSAQMcRAkHOQYbx Building Energy Modeling in OpenStudio - Install the Software]''' || Example || 2025.03.18 || Meta
+
| '''[https://youtu.be/PCcxruCaZO0?si=ov9Jf1SBgJ4oTdbQ OpenStudio 0.8 Basic Workflow Guide (Space Types, Internal Loads, and Schedules)]''' || - || - || This video demonstrates how you can inspect, alter, and apply resource objects in OpenStudio.
 
|-
 
|-
−
| '''[https://youtu.be/O1QFj350a2I?si=g0Zp4NhGE8UoXKx4 Building Energy Modeling in Open Studio - Importing Library Files]''' || Example || 2020.02.14 || Example
+
| '''[https://youtu.be/8KdVvBds_30?si=sztAvTBGFbbqWfVk OpenStudio 0.9 New Features (Constructions, Materials and the Building Component Library)]''' || - || - || This video demonstrates the new construction and material editor in OpenStudio 0.9.0 as well as the integrated Building Component Library functionality.
 
|-
 
|-
−
| '''[https://youtu.be/-5HHfgSlTsc?si=dQ6TMGgsNMlW3Zm2 Building Energy Modeling in OpenStudio - Create Geometry]''' || Example || 2020.02.17 || Example
+
| '''[https://youtu.be/DKLnZaNoRX0?si=nXgf29U2DrjNHozR OpenStudio 0.8 Basic Workflow Guide (HVAC - Zone Equipment, Air Loops, and Plant Loops)]''' || - || - || This video shows you how to add HVAC systems, it introduces the variable and scripts tab, and then runs a simulation with the resulting model.
 +
|-
 +
| '''[https://youtu.be/jUJhi6YH51E?si=7JK53wzMvrwYuYJl OpenStudio 0.9 New Features (Service Hot Water)]''' || - || - || This video shows you how to create models using service hot water. This includes hot water heaters, water use connections, water use equipment, and other associated objects.
 +
|}
 +
 
 +
{| class="wikitable sortable"
 +
|+ OpenStudio Beginners Tutorial
 
|-
 
|-
−
| '''[https://youtu.be/22Lj6kdwWrc?si=NrHPK7Fv0PwGwcU1 Building Energy Modeling in OpenStudio - Add Thermal Zones and Subsurfaces]''' || Example || 2020.02.17 || Example
+
! Name of Video !! Date Published !! Subject !! Summary
 
|-
 
|-
−
| '''[https://youtu.be/0r1-arLaz20?si=bKdKCgmr8n8gf3Vm Building Energy Modeling in OpenStudio - Site Tab]''' || Example || 2020.02.18 || Example
+
| '''[https://youtu.be/VZUMTlTFzFk?si=HqdgBjv4oVDiLf8R Creating Geometry with the OpenStudio SketchUp Plug-in - Part 1]''' || 2010.12.14 || - || This video shows you how to create an EnergyPlus zone and draw heat transfer surfaces inside of the OpenStudio SketchUp Plug-in.
 
|-
 
|-
−
| '''[https://youtu.be/RsLllMkMjqQ?si=8_vr4VPTwh_bxn2h Building Energy Modeling in OpenStudio - Schedules Tab]''' || Example || 2020.02.18 || Example
+
| '''[https://youtu.be/901ls3NS41A?si=MdD8O8gntLA4a5Dg Creating Geometry with the OpenStudio SketchUp Plug-in part 2]''' || 2010.12.14 || - || This video describes how to make shading and interior partition surfaces.
 
|-
 
|-
−
| '''[https://youtu.be/_tN3scXakiM?si=3lw6qRilhRwqi1_Z Building Energy Modeling in OpenStudio - Construction Materials]''' || Example || 2020.02.24 || Example
+
| '''[https://youtu.be/rCNpFTyyKuM?si=RuP54Eo2j3mvzry2 Setting Surface Matching and Outside Boundary Conditions with the OpenStudio SketchUp Plug-in]''' || 2010.12.14 || - || This video demonstrates the surface matching tool and outside boundary conditions.
 
|-
 
|-
−
| '''[https://youtu.be/6qE0jdyCuCI?si=X_0xQqkB2IMoJKhe Building Energy Modeling in OpenStudio - Buildings Loads]''' || Example || 2020.02.24 || Example
+
| '''[https://youtu.be/w9KnL1kIJKk?si=4vmRe728IataoXzv Setting Surface Constructions with the OpenStudio SketchUp Plug-in]''' || 2010.12.14 || - || This video demonstrates using the default constructions dialog box to setup air walls, and also show you how to import constructions from another IDF or OSM file.
 
|-
 
|-
−
| '''[https://youtu.be/5ZjqfSV6M1k?si=CT91AVJRAZcDRTo5 Building Energy Modeling in OpenStudio - Space Types]''' || Example || 2020.02.24 || Example
+
| '''[https://youtu.be/x_46Tx2PjAA?si=uo0yRAiyU0JD-TLH Group and Surface Searching with the OpenStudio SketchUp Plug-in]''' || 2010.12.14 || - || This video shows you how to use SketchUp's outliner window to search zones and groups, and also shows you how to use the OpenStudio Surface Search tool to search through individual surfaces by name or other attributes.
 
|-
 
|-
−
| '''[https://youtu.be/3nUX_BXHODQ?si=00NzDCzj3RzM6xeg Building Energy Modeling in OpenStudio - Geometry Tab]''' || Example || 2020.02.27 || Example
+
| '''[https://youtu.be/r8Erigcyjqg?si=TnejeNAwpeCcd9GZ Adding Zone Loads and Ideal Loads Air Systems with the OpenStudio SketchUp Plug-in]''' || 2010.12.14 || - || This video shows how to add internal loads and an ideal loads air system into your OpenStudio model.
 
|-
 
|-
−
| '''[https://youtu.be/MGjlpbJWhd4?si=WxT5GEOxHYF3hNpv Building Energy Modeling in OpenStudio - Facility Tab]''' || Example || 2020.02.27 || Example
+
| '''[https://youtu.be/8N9pY-zlOjk?si=73Wdhl2dX2aNGNbF Adding Daylighting Controls Objects and Illuminance Maps with the OpenStudio SketchUp Plug-in]''' || 2010.12.14 || - || This video shows you how to place and make use of Daylighting Controls objects and Illuminance Maps.
 
|-
 
|-
−
| '''[https://youtu.be/hOfMFtyfehQ?si=BptdSR03Mlk0rRiW Building Energy Modeling in OpenStudio - Spaces Tab]''' || Example || 2020.02.27 || Example
+
| '''[https://youtu.be/7tDe4le_jcc?si=bgstB3mqz3NWtrWE Running EnergyPlus Simulations from the OpenStudio SketchUp Plug-in - Part 1]''' || 2010.12.14 || - || This video shows you how to run an EnergyPlus simulation from within the OpenStudio SketchUp plug-in.
 
|-
 
|-
−
| '''[https://youtu.be/WyTVm_trmZs?si=9A5V_5_RFr9sKr68 Building Energy Modeling in OpenStudio - Thermal Zones Tab]''' || Example || 2020.03.02 || Example
+
| '''[https://youtu.be/UBEXn0RR7XE?si=cZlKrXWI3HmN-hm6 Running EnergyPlus Simulations from the OpenStudio SketchUp Plug-in - Part 2]''' || 2010.12.14 || - || This video shows you how to use the RDD file to add requests for output variables to your simulation run. It also shows you how to search the EnergyPlus documentation to learn at what frequencies the variables can be reported.
 
|-
 
|-
−
| '''[https://youtu.be/osftawugpL0?si=2X6MxI4OC5U1oayL Building Energy Modeling in OpenStudio - Troubleshooting]''' || Example || 2020.03.03 || Example
+
| '''[https://youtu.be/TI_uygHShL0?si=qEYd8jE1URdVf84F Viewing Simulation Results in the OpenStudio SketchUp Plug-in and ResultsViewer]''' || 2010.12.15 || - || This video shows you how to view time series EnergyPlus simulation results in the OpenStudio SketchUp Plug-in and the OpenStudio ResultsViewer.
 
|-
 
|-
−
| '''[https://youtu.be/WSqe6bZ8Jxg?si=6jNbPMfi1SVXSy1L Building Energy Modeling in OpenStudio - Results Summary]''' || Example || 2020.03.03 || Example
+
| '''[https://youtu.be/fQ6CroLKqAg?si=9uRs_cNk7MXr1Ywf Viewing Tabular Simulation Results with OpenStudio]''' || 2010.12.15 || - || This video shows you how to view tabular simulation results. The data is in an HTM file created by EnergyPlus. You can launch it manually or through the OpenStudio SketchUp Plug-in, RunManager, or the ResultsViewer Application.
 +
|}
 +
 
 +
= [https://www.youtube.com/@openstudiocoalition OpenStudio Coalition] =
 +
{| class="wikitable sortable"
 +
|+ Resources for the OpenStudio Application
 
|-
 
|-
−
| '''[https://youtu.be/zlbarbpqu10?si=nhaqOqavJWdo3MQL Building Energy Modeling in OpenStudio - Add Hot Water System]''' || Example || 2020.03.04 || Example
+
! Name of Video !! Date Published !! Subject
 
|-
 
|-
−
| '''[https://youtu.be/Uo7xKHDXVXc?si=Rq5SeDUZ-Ip8BpIy Building Energy Modeling in OpenStudio - Add HVAC-1]''' || Example || 2020.03.05 || Example
+
| '''[https://youtu.be/QE59uwS6OSU?si=q0qV8AzGReffG7hq  What is OpenStudio? - Introduction video]''' || 2025.04.17 || 0-Meta
 
|-
 
|-
−
| '''[https://youtu.be/NQ4FpKrpeD8?si=GWm-rKLHzawal6fz Building Energy Modeling in OpenStudio - Add HVAC-2]''' || Example || 2020.03.05 || Example
+
| '''[https://youtu.be/87oVvmfW_4I?si=zfrrU3F8Y-e49o2C Using the Parametric Analysis Tool PAT with the OpenStudio App, Part 1]''' || 2020.06.21 || -
 
|-
 
|-
−
| '''[https://youtu.be/GL_fFPGSeAs?si=iO8ixzPkPYWY2f7O Building Energy Modeling in OpenStudio - Add DOAS System]''' || Example || 2020.03.08 || Example
+
| '''[https://youtu.be/37UJ1rOTcgs?si=u_c7KwzP24T3CKe9 Using the Parametric Analysis Tool PAT with the OpenStudio App, Part 2]''' || 2020.06.21 || -
 
|-
 
|-
−
| '''[https://youtu.be/8JlZrvenFBM?si=5D7eofPstoB-eO8o Building Energy Modeling in OpenStudio - Data Viewer]''' || Example || 2020.03.10 || Example
+
| '''[https://youtu.be/A84z7kUh1LA?si=dwc8-XusXgwz85nv Creating Geometry in the OpenStudio App with Floorspace.js]''' || 2020.06.21 || 6-Geometry
 
|-
 
|-
−
| '''[https://youtu.be/AKhr7CcnQ28?si=Ld2F01K7elYShNaZ Building Energy Modeling in OpenStudio - Exhaust MUA]''' || Example || 2020.03.11 || Example
+
| '''[https://youtu.be/9H08kPjY6UI?si=XC_G25ijEv7_6xCU Energy Modeling 101 OpenStudio Application A-Z]''' || 2020.06.21 || -
 +
|}
 +
 
 +
= [https://www.youtube.com/@hssinghal Harshul Singhal - Building Science] =
 +
 
 +
{| class="wikitable sortable"
 +
|+ Building Energy Modeling in OpenStudio
 
|-
 
|-
−
| '''[https://youtu.be/oQPHRyHsdEs?si=rqtKb6K10MhcoxJZ Building Energy Modeling in OpenStudio - Transfer Air]''' || Example || 2020.03.30 || Example
+
! Name of Video !! Date Published !! Subject
 
|-
 
|-
−
| '''[https://youtu.be/WkgQAIaXy78?si=XA88OrZs3YYmNe0O Building Energy Modeling in OpenStudio - SketchUp-1]''' || Example || 2020.07.02 || Example
+
| '''[https://youtu.be/vHlowKG9UDg?si=BzlWDBpapW4G1Rd4 OpenStudio Building Energy Analysis Tool / V01 - Installation Guide / EnergyPlus Simulation / NREL]''' || 2023.04.11 || 0-Meta
 
|-
 
|-
−
| '''[https://youtu.be/cqnQwKZ80yc?si=wgLOi6bi52MR0ii_ Building Energy Modeling in OpenStudio - SketchUp-2]''' || Example || 2021.03.02 || Example
+
| '''[https://youtu.be/LBwov1q0Ge4?si=aTvZYgUH2pZaUStL OpenStudio Building Energy Analysis Tool / V02 - SketchUp Plugin Tutorial 01 / EnergyPlus Simulation]''' || 2023.07.11 || 6-Geometry
 
|-
 
|-
−
| '''[https://youtu.be/4xtbPwMKIEc?si=urKrZ9QB-L2OfCcZ Building Energy Modeling in OpenStudio - Add Heat Pump Hot Water System]''' || Example || 2024.12.08 || Example
+
| '''[https://youtu.be/NOG33MqdEp8?si=LKz_2L2ulgNu3yQk OpenStudio Building Energy Analysis Tool / V03 - SketchUp Plugin Tutorial 02 / EnergyPlus Simulation]''' || 2023.07.11 || 6-Geometry
 +
|-
 +
| '''[https://youtu.be/zdxzbK8Z8RQ?si=Z1_ut1kxsYuunY0X OpenStudio Building Energy Analysis Tool / V05 - Building the 3D geometry / Standard Shapes Method]''' || 2023.10.09 || 6-Geometry
 +
|-
 +
| '''[https://youtu.be/SbMQyFjBbiI?si=Y__4_donPWrS-GHs OpenStudio Building Energy Analysis Tool / V06 - Building 3D geometry / Create Spaces from Diagram]''' || 2023.10.20 || 6-Geometry
 +
|-
 +
| '''[https://youtu.be/a2wqZP56mu4?si=BoC1ARwnKgXSPPTA OpenStudio Building Energy Analysis Tool / V07 - Assign Building Properties IN SketchUp / EnergyPlus]''' || 2023.10.30 || -
 +
|-
 +
| '''[https://youtu.be/6HzJzf6Ifgw?si=1VLZDMwcrZFXSpWI OpenStudio Building Energy Analysis Tool / V08 -Windows SHADES / EnergyPlus Simulation / NREL ]''' || 2023.11.10 || -
 +
|-
 +
| '''[https://youtu.be/IsB0_au9qCQ?si=QB0a61SMf5-akAfU OpenStudio Building Energy Analysis Tool / V09 - WEATHER Files / EnergyPlus Simulation / NREL]''' || 2023.11.10 || -
 +
|-
 +
| '''[https://youtu.be/_McNOM6lXl4?si=7J8ebYStk8wdLuy_ OpenStudio Building Energy Analysis Tool / V10 - UTILITY Data Calibration / EnergyPlus Simulation]''' || 2023.11.10 || -
 +
|-
 +
| '''[https://youtu.be/9EIEJZ2NwAI?si=G0Up2azPqht7tQy7 OpenStudio Building Energy Analysis Tool / V11 - Create SCHEDULES / EnergyPlus Simulation / NREL ]''' || 2023.11.10 || -
 +
|-
 +
| '''[https://youtu.be/pYGCgYATrX0?si=GWlzvvYx76uV-uUS OpenStudio Building Energy Analysis Tool / V12 - Create SCHEDULES / EnergyPlus Simulation / NREL]''' || 2023.12.20 || -
 +
|-
 +
| '''[https://youtu.be/P-2DvvFPe9M?si=mhnMaPyw2rbpTiXl OpenStudio Building Energy Analysis Tool / V13 - Assign SCHEDULES / EnergyPlus Simulation / NREL]''' || 2023.12.30 || -
 +
|-
 +
| '''[https://youtu.be/fky_Z577E98?si=Vk8EtMEyU5WhHYSs Change Zone HVAC Fan Types using Notepad Editing methodology in OpenStudio]''' || 2024.07.25 || -
 
|}
 
|}
  
−
= NRELOpenStudio =
+
= [https://www.youtube.com/@PerformanceSystemsDevelopment PSD (Performance Systems Development)] =
−
# '''[https://youtu.be/xR6iEpMpCiY?si=Uc_JAsILnpooJ3yd OpenStudio 0.8 Basic Workflow Guide (Introduction & Interactive PDF)]'''
+
{| class="wikitable sortable"
−
#* This video gives you an introduction to the interactive PDF for OpenStudio 0.8.0
+
|+ Building Energy Modeling in OpenStudio
−
# '''[https://youtu.be/wzzY_W2WELo?si=CxWVZMA1Z7vupYBv OpenStudio 0.8 Basic Workflow Guide (SketchUp Plugin - Building Envelope)]'''
+
|-
−
#* This video shows you how to choose a template, create your building envelope, add fenestration, and to set boundary conditions and thermal connections between spaces. This video uses the OpenStudio SketchUp plugin.
+
! Name of Video !! Date Published !! Subject
−
# '''[https://youtu.be/8LTexVna_vw?si=bfhjXTpRHNqwy_Nw OpenStudio 0.8 Basic Workflow Guide (SketchUp Plugin - Space Types and Thermal Zones)]'''
+
|-
−
#* This video shows you how to assign space types, thermal zones, and thermostats to the spaces in your model. This video uses the OpenStudio SketchUp plugin.
+
| '''[https://youtu.be/QE59uwS6OSU?si=q0qV8AzGReffG7hq  Introduction to Energy Modeling with OpenStudio - PSD Webinar]''' || 2014.01.20 || -
−
# '''[https://youtu.be/tgeepiBltJI?si=70rFKBFdWJSo-axU OpenStudio 0.8 Basic Workflow Guide (Site, Facility, and Basic Run)]'''
+
|}
−
#* This video goes into the OpenStudio application, adds weather data, shows the outline view in the facility tab and then runs a simulation with ideal air loads.
 
−
# '''[https://youtu.be/PCcxruCaZO0?si=ov9Jf1SBgJ4oTdbQ OpenStudio 0.8 Basic Workflow Guide (Space Types, Internal Loads, and Schedules)]'''
 
−
#* This video demonstrates how you can inspect, alter, and apply resource objects in OpenStudio.
 
−
# '''[https://youtu.be/8KdVvBds_30?si=sztAvTBGFbbqWfVk OpenStudio 0.9 New Features (Constructions, Materials and the Building Component Library)]'''
 
−
#* This video demonstrates the new construction and material editor in OpenStudio 0.9.0 as well as the integrated Building Component Library functionality.
 
−
# '''[https://youtu.be/DKLnZaNoRX0?si=nXgf29U2DrjNHozR OpenStudio 0.8 Basic Workflow Guide (HVAC - Zone Equipment, Air Loops, and Plant Loops)]'''
 
−
#* This video shows you how to add HVAC systems, it introduces the variable and scripts tab, and then runs a simulation with the resulting model.
 
−
# '''[https://youtu.be/jUJhi6YH51E?si=7JK53wzMvrwYuYJl OpenStudio 0.9 New Features (Service Hot Water)]'''
 
−
#* This video shows you how to create models using service hot water. This includes hot water heaters, water use connections, water use equipment, and other associated objects.
 
  
−
= OpenStudio Coalition =
+
= [https://www.youtube.com/@wasjab Wassim Jabi] =
−
* '''[https://youtu.be/MOqlr6NUL9I?si=_agnKlbW56kwQ7uz What is OpenStudio? - Introduction video]'''
+
{| class="wikitable sortable"
−
* '''[https://youtu.be/87oVvmfW_4I?si=zfrrU3F8Y-e49o2C Using the Parametric Analysis Tool PAT with the OpenStudio App, Part 1]'''
+
|+ TopologicEnergy for Blender
−
* '''[https://youtu.be/37UJ1rOTcgs?si=u_c7KwzP24T3CKe9 Using the Parametric Analysis Tool PAT with the OpenStudio App, Part 2]'''
+
|-
−
* '''[https://youtu.be/A84z7kUh1LA?si=dwc8-XusXgwz85nv Creating Geometry in the OpenStudio App with Floorspace.js]'''
+
! Name of Video !! Date Published !! Subject
−
* '''[https://youtu.be/9H08kPjY6UI?si=XC_G25ijEv7_6xCU Energy Modeling 101 OpenStudio Application A-Z]'''
+
|-
 +
| '''[https://youtu.be/NYH0mKUieDk?si=TrNEaufG1I6qD6AJ TopologicEnergyBlender Part01]''' || 2021.09.02 || -
 +
|-
 +
| '''[https://youtu.be/UJXwfvZEKXM?si=AwCTaJdZ34wUbBex TopologicEnergyBlender Part02]''' || 2021.09.02 || -
 +
|-
 +
| '''[https://youtu.be/-YvahhleOzI?si=SLGzqHmGR4QHh0mU TopologicEnergyBlender Part03]''' || 2021.09.02 || -
 +
|-
 +
| '''[https://youtu.be/3HJUZDJV2pE?si=Na0ej8xm_pC77C_- Transferring Custom Properties from Blender to Topologic]''' || 2021.09.05 || -
 +
|-
 +
| '''[https://youtu.be/qLe3tEpXQzU?si=SdCAalzmMYS4kygo Using topologicpy for Building Energy Analysis]''' || 2023.04.07 || -
 +
|-
 +
| '''[https://youtu.be/C8hQLNlzfRI?si=wTdRHc1AjWNZLROc Energy Analysis Using TopologicPy and Viktor.AI ]''' || 2023.04.30 || -
 +
|}
  
 
[[Category:OpenStudio]]
 
[[Category:OpenStudio]]
 
{{Template:OpenStudio Documentation}}
 
{{Template:OpenStudio Documentation}}

Latest revision as of 20:23, 5 May 2025

Helix Energy Partners[edit]

Free Helix Energy Partners videos available on Youtube. Complete playlist is here.

English Language[edit]

Core Instructional Videos[edit]

Building Energy Modeling in OpenStudio
Name of Video Date Published Subject
Introduction to OpenStudio and EnergyPlus 2020.02.12 0-Meta
Introduction to OpenStudio and EnergyPlus - Why? 2023.04.08 0-Meta
Building Energy Modeling in OpenStudio - Install the Software 2025.03.18 0-Meta
Building Energy Modeling in Open Studio - Importing Library Files 2020.02.14 0-Meta
Building Energy Modeling in OpenStudio - Create Geometry 2020.02.17 6-Geometry
Building Energy Modeling in OpenStudio - Add Thermal Zones and Subsurfaces 2020.02.17 9-Thermal Zones
Building Energy Modeling in OpenStudio - Site Tab 2020.02.18 1-Site
Building Energy Modeling in OpenStudio - Schedules Tab 2020.02.18 2-Schedules
Building Energy Modeling in OpenStudio - Construction Materials 2020.02.24 3-Constructions
Building Energy Modeling in OpenStudio - Buildings Loads 2020.02.24 4-Loads
Building Energy Modeling in OpenStudio - Space Types 2020.02.24 5-Space Types
Building Energy Modeling in OpenStudio - Geometry Tab 2020.02.27 6-Geometry
Building Energy Modeling in OpenStudio - Facility Tab 2020.02.27 7-Facility
Building Energy Modeling in OpenStudio - Spaces Tab 2020.02.27 8-Spaces
Building Energy Modeling in OpenStudio - Thermal Zones Tab 2020.03.02 9-Thermal Zones
Building Energy Modeling in OpenStudio - Troubleshooting 2020.03.03 0-Meta
Building Energy Modeling in OpenStudio - Results Summary 2020.03.03 15-Results Summary
Building Energy Modeling in OpenStudio - Add Hot Water System 2020.03.04 10-HVAC Zones
Building Energy Modeling in OpenStudio - Add HVAC-1 2020.03.05 10-HVAC Zones
Building Energy Modeling in OpenStudio - Add HVAC-2 2020.03.05 10-HVAC Zones
Building Energy Modeling in OpenStudio - Add DOAS System 2020.03.08 10-HVAC Zones
Building Energy Modeling in OpenStudio - Data Viewer 2020.03.10 15-Results Summary
Building Energy Modeling in OpenStudio - Exhaust MUA 2020.03.11 10-HVAC Zones
Building Energy Modeling in OpenStudio - Transfer Air 2020.03.30 -
Building Energy Modeling in OpenStudio - SketchUp-1 2020.07.02 6-Geometry
Building Energy Modeling in OpenStudio - SketchUp-2 2021.03.02 6-Geometry
Building Energy Modeling in OpenStudio - Add Heat Pump Hot Water System 2024.12.08 10-HVAC Zones

Portuguese Language[edit]

Construindo modelagem de energia no OpenStudio
Name of Video Date Published Subject
OpenStudio SketchUp - Conceitos básicos sobre simulações termoenergéticas 2020.05.25 0-Meta
Construindo modelagem de energia no OpenStudio - Importando arquivos de biblioteca. 2020.06.16 0-Meta
Construindo modelagem de energia no OpenStudio - Criar geometria 2020.06.24 6-Geometry
Construindo modelagem de energia no OpenStudio - adicione zonas térmicas e subsuperfícies 2020.06.27 9-Thermal Zones
Construindo modelagem de energia no OpenStudio - Guia Site 2020.07.01 -
Construindo modelagem de energia no OpenStudio - guia Agendamentos 2020.07.02 -
Modelagem de energia de construção no OpenStudio - Materiais de construção 2020.07.09 -
Modelagem de energia de edifícios no OpenStudio - Cargas de edifícios 2020.07.13 -
Construindo modelagem de energia no OpenStudio - Tipos de espaço - -
Construindo modelagem de energia no OpenStudio - guia Geometria - -
Construindo modelagem de energia no OpenStudio - Guia Instalações - -
Construindo modelagem de energia no OpenStudio - guia Spaces - -
Construindo modelagem de energia no OpenStudio - Guia Zonas térmicas - -
Construindo modelagem de energia no OpenStudio - Solução de problemas - -
Construindo modelagem de energia no OpenStudio - Resumo dos resultados - -
Modelagem de energia de construção no OpenStudio - Adicionar sistema de água quente - -
Modelagem de energia de construção no OpenStudio - Adicionar HVAC-1 Example Example
Modelagem de energia de construção no OpenStudio - Adicionar HVAC-2 Example Example
Modelagem de energia de construção no OpenStudio - Adicionar sistema DOAS Example Example
Modelagem de energia de construção no OpenStudio - Data Viewer Example Example
Modelagem de energia de construção no OpenStudio - Exaustão de ar compensado Example Example

NRELOpenStudio[edit]

Building Energy Modeling in OpenStudio
Name of Video Date Published Subject Summary
OpenStudio 0.8 Basic Workflow Guide (Introduction & Interactive PDF) - - This video gives you an introduction to the interactive PDF for OpenStudio 0.8.0.
OpenStudio 0.8 Basic Workflow Guide (SketchUp Plugin - Building Envelope) - - This video shows you how to choose a template, create your building envelope, add fenestration, and to set boundary conditions and thermal connections between spaces. This video uses the OpenStudio SketchUp plugin.
OpenStudio 0.8 Basic Workflow Guide (SketchUp Plugin - Space Types and Thermal Zones) - - This video shows you how to assign space types, thermal zones, and thermostats to the spaces in your model. This video uses the OpenStudio SketchUp plugin.
OpenStudio 0.8 Basic Workflow Guide (Site, Facility, and Basic Run) - - This video goes into the OpenStudio application, adds weather data, shows the outline view in the facility tab and then runs a simulation with ideal air loads.
OpenStudio 0.8 Basic Workflow Guide (Space Types, Internal Loads, and Schedules) - - This video demonstrates how you can inspect, alter, and apply resource objects in OpenStudio.
OpenStudio 0.9 New Features (Constructions, Materials and the Building Component Library) - - This video demonstrates the new construction and material editor in OpenStudio 0.9.0 as well as the integrated Building Component Library functionality.
OpenStudio 0.8 Basic Workflow Guide (HVAC - Zone Equipment, Air Loops, and Plant Loops) - - This video shows you how to add HVAC systems, it introduces the variable and scripts tab, and then runs a simulation with the resulting model.
OpenStudio 0.9 New Features (Service Hot Water) - - This video shows you how to create models using service hot water. This includes hot water heaters, water use connections, water use equipment, and other associated objects.
OpenStudio Beginners Tutorial
Name of Video Date Published Subject Summary
Creating Geometry with the OpenStudio SketchUp Plug-in - Part 1 2010.12.14 - This video shows you how to create an EnergyPlus zone and draw heat transfer surfaces inside of the OpenStudio SketchUp Plug-in.
Creating Geometry with the OpenStudio SketchUp Plug-in part 2 2010.12.14 - This video describes how to make shading and interior partition surfaces.
Setting Surface Matching and Outside Boundary Conditions with the OpenStudio SketchUp Plug-in 2010.12.14 - This video demonstrates the surface matching tool and outside boundary conditions.
Setting Surface Constructions with the OpenStudio SketchUp Plug-in 2010.12.14 - This video demonstrates using the default constructions dialog box to setup air walls, and also show you how to import constructions from another IDF or OSM file.
Group and Surface Searching with the OpenStudio SketchUp Plug-in 2010.12.14 - This video shows you how to use SketchUp's outliner window to search zones and groups, and also shows you how to use the OpenStudio Surface Search tool to search through individual surfaces by name or other attributes.
Adding Zone Loads and Ideal Loads Air Systems with the OpenStudio SketchUp Plug-in 2010.12.14 - This video shows how to add internal loads and an ideal loads air system into your OpenStudio model.
Adding Daylighting Controls Objects and Illuminance Maps with the OpenStudio SketchUp Plug-in 2010.12.14 - This video shows you how to place and make use of Daylighting Controls objects and Illuminance Maps.
Running EnergyPlus Simulations from the OpenStudio SketchUp Plug-in - Part 1 2010.12.14 - This video shows you how to run an EnergyPlus simulation from within the OpenStudio SketchUp plug-in.
Running EnergyPlus Simulations from the OpenStudio SketchUp Plug-in - Part 2 2010.12.14 - This video shows you how to use the RDD file to add requests for output variables to your simulation run. It also shows you how to search the EnergyPlus documentation to learn at what frequencies the variables can be reported.
Viewing Simulation Results in the OpenStudio SketchUp Plug-in and ResultsViewer 2010.12.15 - This video shows you how to view time series EnergyPlus simulation results in the OpenStudio SketchUp Plug-in and the OpenStudio ResultsViewer.
Viewing Tabular Simulation Results with OpenStudio 2010.12.15 - This video shows you how to view tabular simulation results. The data is in an HTM file created by EnergyPlus. You can launch it manually or through the OpenStudio SketchUp Plug-in, RunManager, or the ResultsViewer Application.

OpenStudio Coalition[edit]

Resources for the OpenStudio Application
Name of Video Date Published Subject
What is OpenStudio? - Introduction video 2025.04.17 0-Meta
Using the Parametric Analysis Tool PAT with the OpenStudio App, Part 1 2020.06.21 -
Using the Parametric Analysis Tool PAT with the OpenStudio App, Part 2 2020.06.21 -
Creating Geometry in the OpenStudio App with Floorspace.js 2020.06.21 6-Geometry
Energy Modeling 101 OpenStudio Application A-Z 2020.06.21 -

Harshul Singhal - Building Science[edit]

Building Energy Modeling in OpenStudio
Name of Video Date Published Subject
OpenStudio Building Energy Analysis Tool / V01 - Installation Guide / EnergyPlus Simulation / NREL 2023.04.11 0-Meta
OpenStudio Building Energy Analysis Tool / V02 - SketchUp Plugin Tutorial 01 / EnergyPlus Simulation 2023.07.11 6-Geometry
OpenStudio Building Energy Analysis Tool / V03 - SketchUp Plugin Tutorial 02 / EnergyPlus Simulation 2023.07.11 6-Geometry
OpenStudio Building Energy Analysis Tool / V05 - Building the 3D geometry / Standard Shapes Method 2023.10.09 6-Geometry
OpenStudio Building Energy Analysis Tool / V06 - Building 3D geometry / Create Spaces from Diagram 2023.10.20 6-Geometry
OpenStudio Building Energy Analysis Tool / V07 - Assign Building Properties IN SketchUp / EnergyPlus 2023.10.30 -
OpenStudio Building Energy Analysis Tool / V08 -Windows SHADES / EnergyPlus Simulation / NREL 2023.11.10 -
OpenStudio Building Energy Analysis Tool / V09 - WEATHER Files / EnergyPlus Simulation / NREL 2023.11.10 -
OpenStudio Building Energy Analysis Tool / V10 - UTILITY Data Calibration / EnergyPlus Simulation 2023.11.10 -
OpenStudio Building Energy Analysis Tool / V11 - Create SCHEDULES / EnergyPlus Simulation / NREL 2023.11.10 -
OpenStudio Building Energy Analysis Tool / V12 - Create SCHEDULES / EnergyPlus Simulation / NREL 2023.12.20 -
OpenStudio Building Energy Analysis Tool / V13 - Assign SCHEDULES / EnergyPlus Simulation / NREL 2023.12.30 -
Change Zone HVAC Fan Types using Notepad Editing methodology in OpenStudio 2024.07.25 -

PSD (Performance Systems Development)[edit]

Building Energy Modeling in OpenStudio
Name of Video Date Published Subject
Introduction to Energy Modeling with OpenStudio - PSD Webinar 2014.01.20 -

Wassim Jabi[edit]

TopologicEnergy for Blender
Name of Video Date Published Subject
TopologicEnergyBlender Part01 2021.09.02 -
TopologicEnergyBlender Part02 2021.09.02 -
TopologicEnergyBlender Part03 2021.09.02 -
Transferring Custom Properties from Blender to Topologic 2021.09.05 -
Using topologicpy for Building Energy Analysis 2023.04.07 -
Energy Analysis Using TopologicPy and Viktor.AI 2023.04.30 -
OpenStudio This page is OpenStudio documentation. Full documentation is available at the OpenStudio website. All articles in the OSArch wiki related to OpenStudio can be seen in the OpenStudio Category
Retrieved from "https://wiki.osarch.org/index.php?title=OpenStudio/Video_Tutorials&oldid=6182"